Changing the shocks in your Ford Expedition could be done your self with simple tools. Because of the heavy weight of the Expedition, the shocks have to be changed each 50,000 miles. In case your shocks are in want of replacement, your steering and journey will feel spongy. Worn shocks are harmful and must be replaced. Changing the shocks will improve handling and comfort. Totally different aftermarket shocks are available on your Ford Expedition.

Ford Expedition Rear Shock Absorbers Installation Instructions

1. Park the automobile on a flat surface.
2. Find the rear shocks on both sides of the vehicle. The shocks attach to the body of the vehicle and the axle.
3. Remove the two bolts holding the shock into place. Set the bolts apart as you will re-use them. Slide the shock out of the vehicle. The shock retaining nut will fall from the automobile with the shock.
4. Attach the retaining nut to the new shock by pushing into the bushing of the shock using your hands.
5. Slide the alternative shock into position. Install the bolts into the bracket and through the brand new shocks. Tighten the bolts using a ratchet and socket.
6. Repeat this course of on the other side of the vehicle.

Ford Expedition Front Shock Absorbers Installation Instructions

1. Find the higher bracket holding the front shock into position. Locate the upper nut and the tightener nut on the shock body.
2. Remove the nut by putting a wrench on the shock-tightener nut and one other wrench on the removal nut. Rotate the elimination nut whereas holding the shock nut nonetheless with a wrench.
3. Remove the bolt on the decrease bracket of the shock. Slide the shock out of the brackets.
4. Install the new shock into position. Install the bolt in the lower bracket of the shock and tighten utilizing a ratchet and socket. Slide the shock via the higher bracket on the frame. Tighten the nut using a ratchet and socket.
5. Repeat this course of on the opposite facet of the vehicle.